Architecture

No Comments

3D Printing in Architecture

As tge 2019 is at it’s end it has been a great year. 3D printing technology or additive manufacturing has gained a lot of demand and interest of people. It is in high demand and some manufacturers also using it. It’s efficiency and time saving property makes it a good choice for the manufacturers. It is believed that it will surely widespread all over the globe till 2020. It is being used in many industries like medical industry, aerospace industry while some are going to use this technology in future like automobile industry.

If we leave it’s future impact and focus on what it has been used in then we will see that the major part is architecture. At the very beginning of the year 2019 it was clear that it would impact the architecture a lot. This was not a difficult prediction to make after seeing what a 3D printing technology can do. There are high increase has been seen in the people who reads about the 3D printing technology as compared to the previous year, 2018. We are not saying that the architecture industry started using this technology at the beginning of 2019, no, the architecture industry is engaged with this technology from last many years but, tremendous increase was seen in 2019.

This is because there has been improvements made in the 3D printer and some of them have appeared as the best 3D printer. We saw how the architectural community has had a long-running engagement with 3D printing, from using the technology to tackle homelessness, to creating affordable yet complex structural connections.

In fact, while the influence of the technology in the architecture of 2019 was very predictable, this does not mean that 2019 was a boring year in this 3D printing world. The various ways in which this influence manifested was not predictable at all. Throughout the year, 3D printing seemed to be appear everywhere, from spanning a canal to replicating timber, and imagining neighborhoods for Texas and Mars and many more.

A 3D printed which which have made record

In the country Shanghai, a record was broken and a new record was made. In Shanghai, world’s longest 3D-printed concrete pedestrian bridge being completed. The bridge is 26.3 metre long and was designed beautifully. The design was given by Professor Xu Weiguo, professor at Tsinghua University also known as school of architecture. The bridge was inspired by the ancient Anji Bridge in Zhaoxian, China.

3D printed furniture suitable for streets

In the same month in Thessaloniki, The new raw lanuched a new lab named zero waste lab. This research initiative started so that Greek citizens can upcycle their plastic waste into urban furniture. Part of the larger Print Your City project, the project utilizes a robotic arm and recycling facilitates to create custom furniture pieces that close the plastic waste loop. The initiative aims to use flakes from recycled products to redesign public spaces within the cities.

A timbre look-alike

A research was held at New York’s Columbia University. Thus was also happened in the month of January. This research unveiled a method to replicate internal and external texture of wood with the help of 3D printing technology and specialist scanning techniques. The study was named Digital Wood: 3D Internal Color Texture Mapping. Their research led them to a production of a 3D printed closely resembling the texture of olive wood, including a cut-through section.

3D printed concrete pillar or columns

An installation inaugurated in Riom, Switzerland. In this presentation there was installation of concrete columns. They were made with helpof 3D printing technology and robots was involved in their manufacturing. It was done in just 2.5 hours to their full height. Continuing the academic theme, ETH Zurich unveiled details of “Concrete Choreography,”.

3D Printed Living Structures in the Pompidou

In the second month of 2019 the renowned Centre Pompidou in Paris, installed 2 living sculptures. The sculptures was named La Fabrique du vivant which means the fabric of the living. ecoLogicStudio founders Claudia Pasquero and Marco Poletto created “in-human gardens”, two 3D printed living sculptures receptive to human and non-human life.

A 3D Printed Facade for Munich

In the month of March a 3D printed facade was made by 3F studio. Thus was designed to be used as the the new entrance of the Deutsches Museum. The museum is located in Munich, Germany. The German-based startup integrated functions such as ventilation, insulation, and shading into the new façade.

These were some major architecture project made with the help of 3D printed technology. There were many project was also done with it and was applauded by the people all over the world. It is certain that 3D printing technology has a bright future without doubt. We will see many more fascinating architecture design in future for sure.…

3D Printers

No Comments

The best 3D printers in 2019 for beginners and budget creators

3D printing is the technology which seems to go upstream in no time. This has gained popularity in no time. People are using it for their personal use while it is being used in many industries also. This is it’s popularity which attracts more and more people and more and more industries. This was in use for a while but it has gained a tremendous demand in 2019. It’s reading articles also gained double reader than in 2018. It is kind of a technology which has a brighter future and will surely spread more in upcoming years. Many industries will use it to boost up their production.

We have seen it on TV from many years and also in movies. Having a 3D printer at home will be very exotic. 3D printing, also known as additive manufacturing, can be interesting for a curious person. There are many 3D printer available in the market right now. Some of them even claim to be best 3D printer. There are several 3D printers available in the market right now which is easy to use and anyone can use it with the help of little guidance.
Here are the list of some 3D printers which can be used in home and are easy to use. These are not for big scale production. This can be a good present for your loved ones if you have a big budget.

Best cheap 3D printer

Monoprice Select Mini V2

Despite it’s low price, this is a pretty much a full-featured 3D printer you can get at this price, and a favorite affordable first step for testing the 3D print maker waters. Monoprice also sells a less expensive, affordable entry-level design, called the Mini Delta (and the Monoprice Maker, which offers more volume), but this is superior for printing in just about every way — and it is often stay on sale for just $199, sometimes even a little less.

But it is also a good deal harder to set up and use than some of the more expensive printing models. One of the positive side is that the print surface is exposed, so your printing is more vulnerable to the elements (or cats, or children), and it took much tweaking, calibrating and troubleshooting to get good print quality results. This can be a brain consuming for some so it will be good if you consider this first if you want your 3D printer to be easy to use. Despite the beginner price, it’s not as beginner-friendly for printing as I would like it to be. That said, it does come with a preloaded SD card, and people printed some very nice prints from it, eventually and claimed that the printed object was good.

Best plug-and-play 3D printer

Flashforge Adventurer 3/Monoprice Voxel

This is the best go-to printer for balancing price, ease of use and print quality. It’s not a fanciest of 3D printing, but it has a fully enclosed print area, a touchscreen interface and a flexible heated print bed that lets you keep an eye on quality prints with ease.

The most important thing about this pair of printers is that the setup was easy. It has a Wi-Fi connection on this 3D print maker. It could be finicky at times, but at least there’s a USB port right on the front panel for importing your files to the machine via thumb drive.

Best 3D printer for protecting prints

Flashforge Inventor II

The Inventor II is a step-up in quality from the Adventurer/Voxel, even though this 3D print maker is roughly the same size and close to the same build volume. The larger color touchscreen is a huge improvement, this makes it much easier to tap in Wi-Fi passwords before printing. 3D printing will pause automatically if someone opens the door, and the removable heated print bed is hefty, with a clever flexible top surface that peels off magnetically. The manufacturing speed was a little faster than the Adventurer’s speed, with more calibration and fine-tuning options for 3D printing.

Best 3D printer for sharp details

Anycubic Photon

Resin printers are the next step in rapid protoyping design technology when you want your printed object to look high quality. Instead of 3D printing your object with a hot nozzle with high temperatures depositing bits of plastic filament, resin printers use UV light to cure liquid resin, one paper-thin layer at a time, on an upside down print bed that rises at a slow speed from a vat of semitoxic slime.

Yes, it may be unpleasant for some. The resin smells very bad. You’ll need isopropyl alcohol just to wash the prints after they come out, and a UV lamp to end the curing process. It has a lot of work and may create a lot of mess. But the printed model you will get from the Anycubic Photon will be simply amazing and the best 3D printer for sharp details.…

3D Printing

No Comments

3D Printing Repair: How to Use Your Printer to Fix Everything

3D printing has become a widely used technology. It is spreading a lot and sooner it will be an important part of many industries. It has gain it’s popularity due to its efficiency, low waste generation and high precision. You can find one of the best 3D printer around you or in an online store. Many industries are using it while some will introduce this technology sooner. Medical industry, aerospace industry both are using it now and manufacturing their products with the help of 3D printing technology. This saves their time and makes it real quick as compared to the older processes. It has alos reduced the labour which save lot of money of yhe manufacturers.

It has several use in daily life also. It is said that it is a technology for the industries but, it is not so as one can use it for their casual need also. You can use it to repair any damages in your house or can fix an appliance with the help of 3D printing technology. There are many more things you can do with the help of 3D printing technology but we are here going to discuss some of them only. In the following brief guide, we’ll discuss what types of things have been printed, how you can get started, what tools you should use, how to make your prints look smooth and finished, tips and tricks for printing useful things, legal and health questions, as well as some examples of successful projects.

Things that can be fixed

You might have heard that 3D printed parts are excellent for rapid prototyping, but they can also help you around the house when you need the required part to fix that thing you want to get fixed but somehow are not able to do.

So the immediate question is, what types of fixes can be done by 3D printing? And the immediate answer is, a lot of things! Everything from curtain rod mounts to leaky garden hoses to an ice cream maker lid to refrigerator clips to car brake line clips can and has been 3D printed.

There are really few limitations to what 3D printing can do as long as the application doesn’t encounter extremely high temperatures or excessively heavy loads (when most filaments are concerned).

Things you need

Before going to repair your things it will be better if you collect all the things you will need to repair your object.

Tools

In order to model a customized part to fix anything you want to fix, you will need a few tools. While it is certainly possible to scan your parts, 3D scanners can cost you several hundreds of dollars for best 3D printer and do not always give the most accurate dimensions for a final functional part. Therefore, the most accurate way to print a part is to use measurement tools and make a model of your own part in 3D modeling software.

1. Calipers: A pair of calipers is quite helpful for measuring the critical dimensions of an object since they can measure length, inside diameter, outside diameter, and depth of holes with ease and with less error. You can also get a digital one for easement.

2. Protractor (digital): Many objects will not simply be a square or rectangular object and may contain angular parts that need to be designed within a tight tolerance. A digital protractor can help by giving you an idea of what angles are used on an object in order to recreate the object as a 3D model.

3. 3D scanner (optional): 3D scanners allow for an individual part to be scanned and directly converted into a 3D file. Unfortunately, most consumer-grade 3D scanners do not have a resolution better than 0.5-1 mm, therefore, extremely small parts can not be scan well. Additionally, the tolerance on your parts will be off by around as much as a whole millimeter, which may be unacceptable in a functional application.

Knowledge

Once you have identified the part you would like to recreate and you have decided that you can not find any existing file to print, you should take a look at these Instructables, as they will give you a general overview of the process of creating a 3D printed replacement part and the types of considerations you should obviously take into account.

Focus on the material you are going to use for you model and it should be long lasting and hard which should not break easily wasting all your hardwork.

One thing you should keep in mind that the product you printed must not be same as of someone because it will be considered as illegal and the owner may fine you for this. So be careful when you are making one.…